GJ-G800 Control Box +W101E handpiece
1Speed display 2 Speed control knob
3 Positive / reverse buttor 4 Start / pause button 5 Pedal / manual toggle button
6 Handpiece connectior 7 Main power switch
8 Fuse slo 9 Power jack
10 onnecting the pedal jack
-Through the rotation of the foot control handle,
Make work more efficient
1× Main Machine GJ-G800
1× W101E Brushless Handpiece (2.35mm chuck,)
1× Foot Pedal 1× Handpiece bracket
1×power cable 1×user's manual
1. When the handle is used, no water can enter and the bearing will rust. If it enters the water, it must
be dismantled on the same day to clean the water, dry it and use it again (to extend the bearing life).
2. When installing the grinding head, the flying dust on the grinding head rod must be wiped clean and
then placed inside the chuck (the service life of the chuck can be extended).
3. The use of the foot switch must be turned off the power of the host,otherwise it will affect the
performance of the host circuit (seriously can cause the motherboard to short circuit or burn).
4. When the handle is used, the handle should not be idling, and the grinding pin must be installed
(to avoid damage to the bearing and the spindle).
5. Do not touch, especially the handle.
6. Do not refuel the bearings
1. Name: GJ-G800 brushless micromotor+W101E brushless handpiece
2. Power: 50W
3. Rotate speed: 0~50,000 rpm
4. Plug: EU/UK
5. Input Voltage: 220V 50Hz (If you need 110V 60Hz, please leave us message)
6. Dimension: 170mmx160mmx80mm, E-type handpiece: 110mmx24m
7. Package: Bubble bag+foam+carton
1. Brushless micromotor, high quality and stable porformance
2. With hand speed control and foot pedal speed control, more convenivent
3. Right or Left turning ability
4. One year controller quality warranty for the manufacturer
5. CE Certification and Brand Patent
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.